welcome: please sign in

Input

book: Create a structured PDF document with headings, chapters, etc.
webpage: Specifies that the HTML sources are unstructured (plain web pages.) A page break is inserted between each file or URL in the output.
continuous: Specifies that the HTML sources are unstructured (plain web pages.) No page breaks are inserted between each file or URL in the output.
Title of the document for the front page.
Extract the first heading of the document and use it as title. If checked the title field has no effect.
The title image or HTML page. These file has to be an attachments!
Specify document version to be displayed on the title page.
Intellectual property owner of this document.
Copyright notice for this document.
Information about who and when modified the document are applied at the end.

Output

Specifies the output format.
Grayscale document  Title page
Compression :   JPEG big images 

Page

 
User defined page size 		 Choose one of the predefined standard sizes or select user defined.
Specifies the page size using a standard name or in points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm).
Set the target browser width in pixels (400-1200). This determines the page scaling of images.
   2-Sided   Landscape
   
   
   
Specifies the margin size using points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm). Keep empty for default value.
Left
Middle
Right
Sets the page header to use on body pages.
Left
Middle
Right
Sets the page footer to use on body pages.

Contents

Sets the number of levels in the table-of-contents. Empty for unlimited levels.
   Numbered headings Check to number all of the headings in the document.
Sets the title for the table-of-contents. Empty for default title.
Left
Middle
Right
Sets the page header to use on table-of-contents pages.
Left
Middle
Right
Sets the page footer to use on table-of-contents pages.

Colors

Enter the HTML color for the body (background).
Enter the image file for the body (background). These file has to be an attachments!
Enter the HTML color for the text.
Sets the color of links.
Enables generation of links in PDF files.

Fonts

Set the default size of text.
Set the spacing between lines of text.
Choose the default typeface (font) of text.
Choose the default typeface (font) of headings.
Set the size of header and footer text.
Choose the font for header and footer text.
Change the encoding of the text in document.
Check to embed font in the output file.

PDF

Controls the initial viewing mode for the document.
Document: Displays only the docuemnt pages.
Outline: Display the table-of-contents outline as well as the document pages.
Full-screen: Displays pages on the whole screen; this mode is used primarily for presentations.
Controls the initial layout of document pages on the screen.
Single: Displays a single page at a time.
One column: Displays a single column of pages at a time.
Two column left/right: Display two columns of pages at a time; the first page is displayed in the left or right column as selected.
Choose the initial page that will be shown.

Security

Check to number all of the headings in the document.
 Print   Modify
 Copy   Annotate		 Specifies the document permissions.
Specifies the user password to restrict viewing permissions on this PDF document. Empty for no encryption.
Specifies the owner password to control who can change document permissions etc. If this field is left blank, a random 32-character password is generated so that no one can change the document.

Expert

Specify language to use for date and time format.
Shrink code blocks on page.
Show line numbers for code blocks.
Make spaces visable by dots (·) instead of white spaces.
Make line breaks visable by a extra character (¶) at the end.
Enable this feature if you searching for problems or intent to report a bug report

About

Version 2.4.2 (MoinMoin 1.9.9)


MoinMoin - Generate PDF document using HTMLDOC

This action script generate PDF documents from a Wiki site using
the HTMLDOC (http://www.htmldoc.org) software packages which has
to be preinstalled first.

Copy this script in your's MoinMoin action script plugin directory.

Thanks goes to Pascal Bauermeister who initiated the implementaion.
Lot of things changes since then but the idear using HTMLDOC is the
main concept of this implementation.

Please visit the homepage for further informations:
http://moinmo.in/ActionMarket/PdfAction

@copyright: (C) 2006 Pascal Bauermeister
@copyright: (C) 2006-2010 Raphael Bossek <raphael.bossek@solutions4linux.de>
@license: GNU GPL, see COPYING for details

       

Revision 8 as of 2011-03-02 14:38:29

location: Middleware / MpiStart / MpiUtils

MPI-Utils

Contents

  1. MPI-Utils
    1. Installation
    2. Configuration
      1. Configure MPI in site-info.def
      2. Configure CE
      3. Configure WN
    3. Testing

Installation

MPI-Utils is a meta package that depends on MPI-Start and the yaim mpi module for configuration of the MPI support in the CE and WN. Administrators must install a MPI implementation and configure it at the site. Most Linux distributions provide ready to use packages for Open MPI and MPICH implmentations.

MPI-Utils can be installed from the EMI repositories, and should be as easy as: 

yum install glite-mpi

Configuration

Configuration is necessary on both the CE and WNs in order to support and advertise MPI correctly (see SiteConfig for details). This is performed by the yaim MPI module which should be run on both types of nodes.

Configure MPI in site-info.def

Individual "flavours" of MPI are enabled by setting the associated variable to "yes". For example, to enable Open MPI, add the following: 

   1 MPI_OPENMPI_ENABLE="yes"

You may set the path and version to non default locations for a flavour of MPI as follows: 

   1 MPI_OPENMPI_PATH="/opt/openmpi-1.3/"
   2 MPI_OPENMPI_VERSION="1.3"

Possible flavours are:

The remaining variables are:

Variable

Value

MPI_SHARED_HOME

set this to "yes" if you have a shared home area between WNs.

MPI_SSH_HOST_BASED_AUTH

set it to "yes" if you have SSH based authentication between WNs

MPI_<FLAVOUR>_MPIEXEC

If you are using OSC mpiexec (only in PBS/Torque sites), set this to the location of the mpiexec program, e.g. "/usr/bin/mpiexec"

MPI_MPI_START

Location of mpi-start if not installed in standard location /opt/mpi-start/bin/mpi-start

MPI_DEFAULT_FLAVOUR

Set it to the default flavour for your site, if undefined, the first defined flavour will be used

Here is an example configuration: 

   1 #----------------------------------
   2 # MPI-related configuration:
   3 #----------------------------------
   4 # Several MPI implementations (or "flavours") are available.
   5 # If you do NOT want a flavour to be installed/configured, set its variable
   6 # to "no". Else, set it to "yes" (default). If you want to use an
   7 # already installed version of an implementation, set its "_PATH" and
   8 # "_VERSION" variables to match your setup (examples below).
   9 #
  10 # NOTE 1: the CE_RUNTIMEENV will be automatically updated in the file
  11 # functions/config_mpi, so that the CE advertises the MPI implementations
  12 # you choose here - you do NOT have to change it manually in this file.
  13 # It will become something like this:
  14 #
  15 #   CE_RUNTIMEENV="$CE_RUNTIMEENV
  16 #              MPI_MPICH
  17 #              MPI_MPICH2
  18 #              MPI_OPENMPI
  19 #              MPI_LAM"
  20 #
  21 # NOTE 2: it is currently NOT possible to configure multiple concurrent
  22 # versions of the same implementations (e.g. MPICH-1.2.3 and MPICH-1.2.7)
  23 # using YAIM. Customize "/opt/glite/yaim/functions/config_mpi" file
  24 # to do so.
  25 
  26 MPI_MPICH_ENABLE="yes"
  27 MPI_MPICH2_ENABLE="yes"
  28 MPI_OPENMPI_ENABLE="yes"
  29 MPI_LAM_ENABLE="yes"
  30 
  31 # set Open MPI as default flavour
  32 MPI_DEFAULT_FLAVOUR=OPENMPI
  33 
  34 
  35 #---
  36 # Example for using an already installed version of MPI.
  37 # Setting "_PATH" and "_VERSION" variables will prevent YAIM
  38 # from downloading and installing the gLite-provided packages.
  39 # Just fill in the path to its current installation (e.g. "/usr")
  40 # and which version it is (e.g. "6.5.9").
  41 #---
  42 MPI_MPICH_PATH="/opt/mpich-1.2.7p1/"
  43 MPI_MPICH_VERSION="1.2.7p1"
  44 MPI_MPICH2_PATH="/opt/mpich2-1.0.4/"
  45 MPI_MPICH2_VERSION="1.0.4"
  46 MPI_OPENMPI_VERSION="1.1"
  47 MPI_LAM_VERSION="7.1.2"
  48 
  49 # If you do NOT provide a shared home, set $MPI_SHARED_HOME to "no" (default).
  50 #
  51 MPI_SHARED_HOME="yes"
  52 
  53 #
  54 # If you do NOT have SSH Hostbased Authentication between your WNs, set the below
  55 # variable to "no" (default). Else, set it to "yes".
  56 #
  57 MPI_SSH_HOST_BASED_AUTH="no"
  58 
  59 #
  60 # If you provide an 'mpiexec' for MPICH or MPICH2, please state the full path to
  61 # that file here (http://www.osc.edu/~pw/mpiexec/index.php). Else, leave empty.
  62 #
  63 #MPI_MPICH_MPIEXEC="/usr/bin/mpiexec"
  64 MPI_MPICH_MPIEXEC="/usr/bin/mpiexec"

Configure CE

/opt/glite/yaim/bin/yaim -c -s site-info.def  -n MPI_CE

Configure WN

For a Torque worker node: /opt/glite/yaim/bin/yaim -c -s site-info.def  -n MPI_WN

Testing

You can do some basic tests by logging in on a WN as a pool user and running the following: 

[dte056@cagnode48 dte056]$ env|grep MPI_

You should see something like this: 

MPI_MPICC_OPTS=-m32
MPI_SSH_HOST_BASED_AUTH=yes
MPI_OPENMPI_PATH=/opt/openmpi/1.1
MPI_LAM_VERSION=7.1.2
MPI_MPICXX_OPTS=-m32
MPI_LAM_PATH=/usr
MPI_OPENMPI_VERSION=1.1
MPI_MPIF77_OPTS=-m32
MPI_MPICH_VERSION=1.2.7
MPI_MPIEXEC_PATH=/opt/mpiexec-0.80
MPI_MPICH2_PATH=/opt/mpich2-1.0.4
MPI_MPICH2_VERSION=1.0.4
I2G_MPI_START=/opt/mpi-start/bin/mpi-start
MPI_MPICH_PATH=/opt/mpich-1.2.7p1

You can also try submitting a job to your site, please read MPI-Start user documentation